Atmor Heaters

eco-friendly, efficient and convenient solutions

Hot Water
On Demand

The Atmor heater is built to supply endless hot water on demand. By opening the faucet (or shower) you activate the system, so that the water goes through the unit and heating elements and comes out to you at the desired temperature and flow rate. When you turn off the water, the heater will automatically disconnect itself from the power source.

Our Products

Single Shower Model 210

3.5KW (110V) AND 5KW(220V)
  • 110V: Designed for locations without 220V, and will provide only a mild temperature increase.
  • 220V: More energy efficient than a 110V unit and gets the water hotter.
  • 4 temperature levels Use different settings according to the season and the water flow intensity.
  • Basic electric requirements: For 3kW 110V unit – single phase 32 Amp breaker , 4mm T&E. For 5kW 220v unit – dual phase 30 Amp breaker, 4mm T&E wire.
  • The unit supplies instant unlimited hot water until unit or water is turned off.
  • Up to 80% energy saving compared to a boiler heater. Refer to chart on brochure. Energy is used only when the unit is in the on position and if water is flowing through it at a flow greater than 1.2 litres per minute. Lower flow will not activate the unit.
  • Water saving. Compared to a boiler, solar or inline unit, no water is wasted while waiting for hot water to arrive from electric boiler, solar heater or inline.
  • Shower head is able to adjust to maximize water savings, and temperature settings.
  • Time efficient as it takes only 15 seconds to heat water.

Inline 800

5KW AND 7KW

  • Entire house multi-function unit: Designed to be connected on house main hot water line. Supplies hot water for the entire house. In the Caribbean, with warm incoming water, it is capable of heating up to 60 feet from unit. Performs best with low flow shower heads. Not designed for baths or hot tubs.
  • Hidden installation.
  • 4 temperature level.
    Varies according to season and intensity of water flow.
  • Basic electric requirements:
    For 5kW 220v unit- 30 Amp Double pole breaker, 4mm T&E wire.
  • Instantaneous unlimited hot water supply.
    The unit supplies instant unlimited hot water in 15 seconds and lasts until unit or water is turned off.
  • Up to 80% energy saving – refer to chart on brochure Energy is activated only when the unit and water are on. Flow must be greater than 1.2 litres per minute.
  • Water saving Instant hot water upon demand!!!!
  • Water Saving device for maximum efficiency included.
    A device connecting to outlet designed to increase heater efficiency is included.

Thermoboost

12KW

  • Supplies hot water on demand throughout the house
  • The most efficient thermostatic device
  • Significant savings in energy consumption: heating power adjusts automatically according to actual temperature to achieve selected temperature with maximum energy saving
  • Ideal as a booster for a solar water heater system as it provides the selected water temperature when hot water supply has run low (for example, on cloudy or colder days)
    The most energy efficient way of directly heating water electrically
  • Highly efficient tubular heating element
  • Zero standing heat loss as no water is stored
  • Automatically activated only when hot water faucet is turned on
  • Constant supply of hot water at exactly the temperature selected
  • Nonvisible installation
  • Green & Eco product – Energy & water saver
  • Complies with international standards

5 Beechwood Ave, Kingston 5, Jamaica W.I. | Phone: 888-HEATERS | 1-876-754-5997| Fax: 1-876- 906-6480 | Whatsapp: 876-566-9535

Sales@lupodistributors.com | Servicing@lupodistributors.com

© 2024 All Rights Reserved